Detailed description
2.11 Supplementary conditions and NC VAR selector
Basic logic functions: PLC Basic program powerline (P3 pl)
86 Function Manual, 11/2006, 6FC5397-0BP10-2BA0
• Archiving of utility routines
– Allocation of the output statuses of individual blocks
– Comparison of blocks
– Rewiring
– STEP 5 -> STEP 7 converter
• Option packages
– Programming in S7–HIGRAPH, S7–GRAPH, SCL.
These packages can be ordered from the SIMATIC sales department.
– Additional packages for configuring modules
(e.g., CP3425 -> NCM package)
Note
More information about possible functions can be found in SIMATIC catalogs and
STEP 7 documentation.
2.11.1.2 SIMATIC documentation required
References:
SIMATIC S 7 System Overview
S7-300, CPU 314, CPU 315-2DP Operation List
Programming with STEP 7
STEP 7 User's Guide
STEP 7 Programming Manual; Designing User Programs
STEP 7 Reference Manual; STL Instruction List
STEP 7 Reference Manual; LAD Ladder Diagram
STEP 7 Reference Manual; Standard and System Functions
STEP 7 Manual: Conversion of STEP 5 Programs
STEP 7 General Index
CPU 314, CPU 315-2DP Manual
2.11.1.3 Relevant SINUMERIK documents
References:
/IAD/840D, 611D Commissioning Manual; PLC Interface
/IAG/810D, 611D Commissioning Manual; PLC Interface
/BH/Operator Components Manual (HW)/840D/FM NC/810D
/FB/840D, 810D Function Manual
/LIS/840D/810 D Lists
/FBP/PLC C Programming
To Next Page
Loading...
Need help?
General
