EasyManuals Logo

Siemens SINUMERIK 840D sl Function Manual

Siemens SINUMERIK 840D sl
2184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #241 background imageLoading...
Page #241 background image
Functions
2.8 Acceleration with active jerk limitation (SOFT/SOFTA) (axis-specific)
Basic logic functions: Acceleration (B2)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
23
This is used to generate the maximum value for axis-specific acceleration with programmed
rapid traverse (G00) that is taken into account by the path planning component during
preprocessing:
Acceleration[axis] =
MD32300 $MA_MAX_AX_ACCEL * MD32434 $MA_G00_ACCEL_FACTOR
2.7.3 Programming
The function is not programmable.
2.8 Acceleration with active jerk limitation (SOFT/SOFTA) (axis-specific)
2.8.1 Detailed Description
2.8.1.1 General Information
Function
Compared with acceleration without jerk limitation, acceleration with jerk limitation results in
a certain degree of time loss, even when the same maximum acceleration value is used. To
compensate for this time loss, a specific maximum value can be programmed for the axis-
specific acceleration as far as traversing of the machine axes with active jerk limitation
(SOFT/SOFTA) is concerned.
The maximum value for acceleration with active jerk limitation is parameterized using a
factor calculated in relation to the axis-specific maximum value. This is used to generate the
maximum value for axis-specific acceleration with active jerk limitation that is taken into
account by the path planning component during preprocessing:
Acceleration[axis] =
MD32300 $MA_MAX_AX_ACCEL * MD32433 $MA_SOFT_ACCEL_FACTOR

Table of Contents

Other manuals for Siemens SINUMERIK 840D sl

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SINUMERIK 840D sl and is the answer not in the manual?

Siemens SINUMERIK 840D sl Specifications

General IconGeneral
Control TypeCNC
Number of AxesUp to 31
Max Number of Channels10
InterfacesEthernet, PROFIBUS, PROFINET, USB
Interpolation5-axis interpolation
Operating Temperature0°C to 45°C
Relative HumidityUp to 95% (non-condensing)
DisplayTFT color display, various sizes
Programming LanguagesDIN/ISO
Safety FeaturesSafety Integrated
PLCIntegrated PLC S7-300
Drive InterfaceSINAMICS S120
Data StorageCF card, USB
Operating SystemWindows-based

Related product manuals