Siemens SINUMERIK 840D sl Function Manual

Detailed description
2.4 Starting up the PLC program
Basic logic functions: PLC basic program solution line (P3 sl)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
19
2.4.2 Application of basic program
A new CPU program (e.g., "Turnma1") must be set up in a project by means of the STEP7
software for each installation (machine).
Comment
The catalog structures of a project and the procedure for creating projects and user
programs are described in the relevant SIMATIC documentation.
Procedure
The basic-program blocks are copied using the SIMATIC Manager and File/Open/Library.
The following components must be copied from the library:
• From the block container: FCs, FBs, DBs, OBs, SFC, SFB, UDT
• Source_files (from the source container): GPOB840D
• Possibly MDECLIST, HHU_DB and others
• The symbols table (from the symbols container)
Compatibility with STEP 7
There are no dependencies between the basic program and current STEP7 versions.

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based