EasyManuals Logo

Siemens SINUMERIK 840D sl Function Manual

Siemens SINUMERIK 840D sl
2184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
Detailed description
2.1 Axis monitoring
Basic logic functions: Axis monitoring, protection zones (A3)
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
23
Activation
The actual-velocity monitoring is activated as soon as the active measuring system returns
valid actual values (encoder limit frequency not exceeded):
DB31, ... DBX1.5/1.6 (position measuring system 1/2)
Effectivity
The actual-velocity monitoring only operates with active position control and the following
axis types:
Linear axes
Rotary axes
Open loop controlled and position controlled spindles.
Fault
If the threshold is exceeded, the following alarm appears:
25030 "Axis <Axis identifier> Actual-velocity alarm limit"
The affected axis is stopped via the configured braking ramp in follow-up mode:
MD36610 $MA_AX_EMERGENCY_STOP_TIME
(Maximum time for braking ramp when an error occurs)
2.1.5 Measuring-system monitoring (systems with SIMODRIVE 611D)
2.1.5.1 Encoder-limit-frequency monitoring
Function
The encoder-limit-frequency monitoring checks that the encoder frequency does not exceed
the configured encoder limit frequency.
MD36300 $MA_ENC_FREQ_LIMIT (encoder limit frequency)
Encoder-limit-frequency monitoring always refers to the active measuring system selected in
the NC/PLC interface:
DB31, ... DBX1.5/1.6 (position measuring system 1/2)
Effectivity
The encoder limit frequency is operative for:
Linear axes
Rotary axes
Open loop controlled and position controlled spindles.

Table of Contents

Other manuals for Siemens SINUMERIK 840D sl

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SINUMERIK 840D sl and is the answer not in the manual?

Siemens SINUMERIK 840D sl Specifications

General IconGeneral
Control TypeCNC
Number of AxesUp to 31
Max Number of Channels10
InterfacesEthernet, PROFIBUS, PROFINET, USB
Interpolation5-axis interpolation
Operating Temperature0°C to 45°C
Relative HumidityUp to 95% (non-condensing)
DisplayTFT color display, various sizes
Programming LanguagesDIN/ISO
Safety FeaturesSafety Integrated
PLCIntegrated PLC S7-300
Drive InterfaceSINAMICS S120
Data StorageCF card, USB
Operating SystemWindows-based

Related product manuals