Siemens SINUMERIK 840D sl Function Manual

Functions
2.12 Jerk limitation with single-axis interpolation (SOFTA) (axis-specific)
Basic logic functions: Acceleration (B2)
32 Function Manual, 11/2006, 6FC5397-0BP10-2BA0
2.12.2 Activation
2.12.2.1 Parameterization
Function
The function's initial setting and the maximum values are parameterized for specific axes
using machine data:
MD32420 $MA_JOG_AND_POS_JERK_ENABLE
(initial setting of axial jerk limitation)
MD32430 $MA_JOG_AND_POS_MAX_JERK (maximum axis jerk)
2.12.3 Programming
Syntax
SOFTA ( Axis { Axis })
Functionality
The SOFTA part-program instruction is used to select acceleration with jerk limitation for
single-axis movements (positioning axis, reciprocating axis, etc.)
G group: -
Effective: modal
Axis :
• Value range: Axis identifier for channel axes
Axis-specific initial setting
Acceleration with jerk limitation can be set as the axis-specific initial setting for single-axis
movements:
MD32420 $MA_JOG_AND_POS_JERK_ENABLE = TRUE
Reset response
The axis-specific initial setting is activated via a reset:
MD32420 $MA_JOG_AND_POS_ENABLE

Siemens SINUMERIK 840D sl Specifications

General

Control Type	CNC
Number of Axes	Up to 31
Max Number of Channels	10
Interfaces	Ethernet, PROFIBUS, PROFINET, USB
Interpolation	5-axis interpolation
Operating Temperature	0°C to 45°C
Relative Humidity	Up to 95% (non-condensing)
Display	TFT color display, various sizes
Programming Languages	DIN/ISO
Safety Features	Safety Integrated
PLC	Integrated PLC S7-300
Drive Interface	SINAMICS S120
Data Storage	CF card, USB
Operating System	Windows-based