Siemens SIPROTEC 7SS522 V4.6

Getting Started
42
7SS52 V4 Manual
C53000-G1176-C182-3
Figure 3-5 Operator menu for setting the device address in the bay units
To change the substation address or the feeder address from the operator panel of
the bay unit, go to the parameters 7202 FEEDER ADD. (feeder address) or to 7203
SUBST. ADD. (substation address) and proceed as described above.
ENTER
7201 DEVICE ADD.
1
7200 PC/SYSTEM
INTERFACES
Enter password
¹¹¹¹¹¹
ENTER
Passw. accepted
ENTER
7201 DEVICE ADD.
1
CHANGE MODE
ENTER
F1
ESC
www . ElectricalPartManuals . com