Functions
7.9 High Feature 3RW5 HMI
SIRIUS 3RW52 Soft Starter
122 Manual, 01/2019, A5E35630451002A/RS-AD/004
Note
I&M data
Please note that it is not possible to process the displayed information of the 3RW5 HMI
High Feature.
7.9.7 Defining the local access protection (PIN)
Requirements
● Access protection to the 3RW5 HMI High Feature is not active or has been reset.
● You are in menu "Security > Local Access Protection".
"Define PIN" procedure
1. Choose menu "Define PIN".
In the factory setting, no PIN is active.
2. Using the navigation keys, define a 4-digit PIN and confirm your entry with "OK".
After confirmation of the entry, the PIN returns the 3RW5 HMI High Feature to the "Local
access protection" menu.
The set PIN is now active.
"Change PIN" procedure
1. Select the "Change PIN" menu.
2. Log in using the current 4-digit PIN and confirm your entry with "OK".
If the entry is correct, the display of the 3RW5 HMI High Feature will show the user
information "Log in was successful". Confirm with "OK".
3. Using the navigation keys, define a 4-digit PIN and confirm your entry with "OK".
The display of the 3RW5 HMI High Feature shows the user information "Log out was
successful". Confirm with "OK".
After confirmation, the 3RW5 HMI High Feature returns to the "Local access protection"
menu.
The changed PIN is now active.
To Next Page
Loading...
