Siemens SIRIUS 3RW52 - Removing the High Feature 3 RW5 HMI

Mounting and dismantling
3.4 Installing / mounting / removing 3RW5 HMI
SIRIUS 3RW52 Soft Starter
Manual, 01/2019, A5E35630451002A/RS-AD/004
45
3.4.4 Removing the High Feature 3RW5 HMI
Requirements
● Cross-tip screwdriver
Procedure
NOTICE
Damage to sealing surfaces.
Make sure that the sealing surfaces are not damaged by the screwdriver.
● Release the 3RW5 HMI High Feature using a flat-bladed screwdriver in the groove
provided
① + ②.
● Pull the 3RW5 HMI High Feature far enough out of the 3RW52 soft starter
③ to gain
access to the HMI connecting cable.
● Unfasten the retaining elements of the HMI connecting cable
④ and pull the HMI
connecting cable out of the 3RW52 soft starter
⑤.