Mounting and dismantling
3.4 Installing / mounting / removing 3RW5 HMI
SIRIUS 3RW52 Soft Starter
42 Manual, 01/2019, A5E35630451002A/RS-AD/004
3.4 Installing / mounting / removing 3RW5 HMI
3.4.1 Installing the Standard 3RW5 HMI in 3RW52 soft starter
Requirements
● 3RW5 HMI Standard (accessories)
● HMI connecting cable, 0.1 m (accessory)
● Hinged cover for 3RW52 with cutout for 3RW5 HMI Standard (accessory) or Cut out the
hinged cover for 3RW5 HMI (Page 57)
Procedure
Material damage caused by electrostatic charge.
ESD devices can be destroyed by voltages well below the threshold of human perception.
These static voltages develop when you touch a component or electrical connection of a
device without having discharged your own body. The electrostatic discharge current may
result in latent failure of a module, that is, this damage may not be apparent immediately,
but may cause malfunction after a lengthy period of operation.
To Next Page
Loading...
