Wiring
4.8 Connecting the control terminals (spring-type terminals)
SIRIUS 3RW52 Soft Starter
Manual, 01/2019, A5E35630451002A/RS-AD/004
71
4.8 Connecting the control terminals (spring-type terminals)
Requirements
● Observe the conductor cross-sections and tightening torques in the data sheet or on the
front beneath the hinged cover.
● Pay attention to the required tools indicated on the front beneath the hinged cover.
Procedure
Hazardous voltage.
Will cause death or serious injury.
Turn off and lock out all power supplying this device before working on this device.
Example circuits
● Control by pushbutton (Page 167)
● Control by switch (Page 168)
● Switching with the control supply voltage (Page 169)
● Control by PLC (Page 171)
● Actuation of a line contactor (Page 172)
● Wiring for remote RESET (Page 174)
● Connecting the temperature sensor (Page 175)
● Connecting the evaluation unit to the analog output (Page 176)
To Next Page
Loading...
