Siemens SIRIUS 3RW52 - Mounting and dismantling; Installing the 3 RW52 soft starter

SIRIUS 3RW52 Soft Starter
Manual, 01/2019, A5E35630451002A/RS-AD/004
37
Mounting and dismantling
3
3.1 Installing the 3RW52 soft starter
Procedure
1. Mount the 3RW52 soft starter on a level surface. (Page 40)
2. Ensure that the permissible temperature range and the necessary distances are complied
with.
Technical data in Siemens Industry Online Support (Page 155)
3. Optionally mount the fan cover. (Page 38)
4. Optionally install the Standard or High Feature 3RW5 HMI.
– Installing the Standard 3RW5 HMI in 3RW52 soft starter (Page 42).
– Installing the High Feature 3RW5 HMI in the 3RW52 soft starter (Page 44).
– Installing the Standard 3RW5 HMI into the control cabinet door (Page 46).
– Installing the High Feature 3RW5 HMI in the control cabinet door (Page 49).
– Installing the Standard 3RW5 HMI on a flat surface (Page 53).
– Installing the High Feature 3RW5 HMI on a flat surface (Page 55).
5. Optionally install the 3RW5 communication module.
You will find more details in the equipment manual for the 3RW5 communication module
in question.
Result
The 3RW52 soft starter is installed and ready for connection.