Siemens SIRIUS 3RW52 - Overview of Leds on Standard 3 RW5 HMI

Messages and diagnostics
8.2 LED display
SIRIUS 3RW52 Soft Starter
Manual, 01/2019, A5E35630451002A/RS-AD/004
131
8.2.4 Overview of LEDs on Standard 3RW5 HMI
Display of the device LEDs of the 3RW5 HMI Standard shows the messages of the following
devices:
● 3RW5 soft starter
● 3RW5 communication module (if there is one)
Status LED
Status
LED
Status of the soft starter
Motor operating state
Lights up
green
Operation The ramp-up time is over, the motor is running,
and the soft starter is in bypass mode.
Flashes
green
Ramp-up or ramp-down time active Motor is ramping up or ramping down.
Reference
You will find more information on the messages of the soft starter in the Chapter Status and
error displays (Page 129).
You will find more information on the messages of the 3RW5 communication module in the
equipment manual for the 3RW5 communication module in question.
The display on the status LEDs of the Standard 3RW5 HMI indicates the state of the soft
starter and the operating state of the motor.