Description
1.10 Accessories
SIRIUS 3RW52 Soft Starter
24 Manual, 01/2019, A5E35630451002A/RS-AD/004
1.10.4 3RW5 HMI
3RW5 HMI Standard
The 3RW5 HMI Standard can be used to monitor and control (motor ON / OFF) the 3RW52
soft starter and acknowledge faults. The 3RW5 HMI Standard can either be installed in the
3RW52 soft starter or in the control cabinet door (using accessories) or mounted on a wall
(using accessories). It features an LCD with red display illumination and LEDs for status
display, as well as function and control keys.
Functions
● Any changes of setting elements will be indicated immediately in the display.
● Error diagnostics are output as error numbers (Faults and remedial actions of the 3RW52
soft starter (Page 134)).
● Acknowledgment of faults and execution of user tests via the RESET / TEST key
● Starting and stopping the motor via control keys
● Mode change with the LOCAL / REMOTE key.
● Setting the PROFIBUS station address.
● Display of the device LEDs of the 3RW5 HMI Standard shows the messages of the
following devices:
– 3RW52 soft starter
– 3RW5 HMI Standard
– Communication module (if there is one)
To Next Page
Loading...
