Siemens SIRIUS 3RW52 - Diagnostics of Communication with the High Feature 3 RW5 HMI; Execute HMI Diagnostics with the 3 RW5 HMI High Feature

Messages and diagnostics
8.8 Diagnostics of communication with the High Feature 3RW5 HMI
SIRIUS 3RW52 Soft Starter
142 Manual, 01/2019, A5E35630451002A/RS-AD/004
8.8 Diagnostics of communication with the High Feature 3RW5 HMI
Requirements
● You are in the "Diagnosis > Communication" menu.
Parameters
Diagnostic value
Comment
Diagnosis state Shows all active warnings and faults.
You can acknowledge faults here.
8.9 Execute HMI diagnostics with the 3RW5 HMI High Feature
Requirements
● You are in the "Diagnosis > HMI" menu.
Parameters
Diagnostic value
Comment
Diagnosis state
Shows all active diagnostic messages.
Self-test Test LEDs The device LEDs of the 3RW5 HMI High
Feature are tested one after the other. The
display of the 3RW5 HMI High Feature
shows which device LED is currently being
controlled. You can navigate through the test
operation with the "OK" key.
Test buttons The 3RW5 HMI High Feature keys/buttons
are tested one after the other. The display of
the 3RW5 HMI High Feature indicates what
key has to be pressed.
Test display The 3RW5 HMI High Feature runs a color
program on the display. Navigate through
the test operation with the "OK" key.