Siemens SIRIUS 3RW52 - Restoring the Factory Settings with the Master RESET Button Via 3 RW5 HMI High Feature

Maintenance and servicing
9.5 Restore factory setting
SIRIUS 3RW52 Soft Starter
Manual, 01/2019, A5E35630451002A/RS-AD/004
153
9.5.2 Restoring the factory settings with the Master RESET button via 3RW5 HMI
High Feature
Requirements
● Free access to the Master RESET key of the 3RW5 HMI High Feature
Removing the High Feature 3RW5 HMI (Page 45)
● 3RW5 HMI High Feature is connected to the soft starter via the HMI connecting cable.
Procedure
1. Press the Master RESET key on the rear of the 3RW5 HMI High Feature.
The menu for restoring the factory setting appears on the display.
2. Select the desired menu item.
– 3RW5 soft starter
– Communication module
– 3RW5 HMI High Feature
– All
3. Confirm the menu item with "OK".
Result
The factory setting of the selected device or all devices is restored.
Note the effects of the factory settings described in Chapter Restore factory setting
(Page 151).