Siemens SIRIUS 3RW52 - Performing Firmware Update with Micro SD Card (3 RW5 HMI High Feature)

Maintenance and servicing
9.4 Performing firmware update with micro SD card (3RW5 HMI High Feature)
SIRIUS 3RW52 Soft Starter
150 Manual, 01/2019, A5E35630451002A/RS-AD/004
9.4 Performing firmware update with micro SD card (3RW5 HMI High
Feature)
Requirements
● Micro SD card with valid firmware file (*.upd)
● The valid firmware file is located in the root directory (topmost level)
● You are in the "Micro SD card > FW Update" menu.
Procedure
Note
Access to micro SD card.
Please note that the micro
SD card is inserted in the 3RW5 HMI High Feature during
updating of the firmware.
Premature removal of the micro
SD card from the 3RW5 HMI High Feature i
s not permissible
and will terminate updating of the firmware. Data could also be lost.
● Select the folder of the respective device.
● Select the firmware file of the device and confirm with "OK".
You can see the firmware update is being performed from the progress bar on the
display.
Following successful updating of the firmware, the respective device then restarts
automatically.
Note
Firmware update of the 3RW5 HMI High Feature:
Please note that the display switches off for about 30
seconds when the firmware is
activated.
● Check the new firmware version in the "Overview" menu.
Result
You have performed a firmware update for the selected device using the micro SD card.