Siemens SIRIUS 3RW52 - Installing the High Feature 3 RW5 HMI in the 3 RW52 Soft Starter

Mounting and dismantling
3.4 Installing / mounting / removing 3RW5 HMI
SIRIUS 3RW52 Soft Starter
44 Manual, 01/2019, A5E35630451002A/RS-AD/004
3.4.3 Installing the High Feature 3RW5 HMI in the 3RW52 soft starter
Requirements
● 3RW5 HMI High Feature (accessory)
● HMI connecting cable, 0.1 m (accessory)
● Hinged cover for 3RW52 with cutout for 3RW5 HMI High Feature (accessory) or Cut out
the hinged cover for 3RW5 HMI (Page 57)
Procedure
NOTICE
Material damage caused by electrostatic charge.
ESD devices can be destroyed by voltages well below the threshold of human perception.
These static voltages develop when you touch a component or electrical connection of a
device without having discharged your own body. The electrostatic discharge current may
result in latent failure of a module, that is, this damage may not be apparent immediately,
but may cause malfunction after a lengthy period of operation.
● Observe the coding of the plug and socket
① + ③.
● Lock the connector in the socket
②.
● Observe the cable routing:
① Cable routing to the right
③ Cable routing to the left
● Replace the hinged cover of the 3RW52 soft starter as required. (Page 58)