Siemens SIRIUS 3RW52 - Commissioning; Commissioning the 3 RW52 soft starter

SIRIUS 3RW52 Soft Starter
Manual, 01/2019, A5E35630451002A/RS-AD/004
89
Commissioning
6
6.1 Commissioning the 3RW52 soft starter
Procedure
1. Install the 3RW52 soft starter. (Page 37)
2. Connect the 3RW52 soft starter. (Page 63)
3. Parameterize the 3RW52 soft starter according to the application with the setting
suggestions. (Page 82)
If necessary, optimize the setting suggestions step by step. (Page 81)
For example, you can continually adjust the current limiting factor while the motor is
starting up.
4. Perform the user test. (Page 146)
5. Optionally seal the 3RW52 soft starter with a lead seal. (Page 90)
Result
The 3RW52 soft starter is ready for operation.