Mounting and dismantling
3.3 Mounting the 3RW52 soft starter on a level surface
SIRIUS 3RW52 Soft Starter
Manual, 01/2019, A5E35630451002A/RS-AD/004
41
Procedure
Device can cause injury if it is dropped.
Always ask a second person to help you transport, install and dismantle a heavy device.
Use suitable lifting equipment and wear personnel protective equipment.
● Screw the lower 2 screws into the mounting plate ①. Ensure that both screws of
min. 1.5 cm (min. 2 cm for size 4) are protruding and then place the 3RW52 soft starter
onto the 2 lowermost screws
② from above.
● Tilt the 3RW52 soft starter up so that it is resting level against the mounting plate
③ and
tighten all 4 screws
④.
To Next Page
Loading...
