Siemens SIRIUS 3RW52 - Page 125

Functions
7.9 High Feature 3RW5 HMI
SIRIUS 3RW52 Soft Starter
Manual, 01/2019, A5E35630451002A/RS-AD/004
125
Parameters
The "Micro SD Card" menu appears after you have inserted a micro SD card into the 3RW5
HMI High Feature.
Action
Description
Load communication and HMI parameters to soft
starter
The parameters of the communication and the 3RW5 HMI High
Feature are transferred from the micro SD card to the 3RW52 soft
starter. The following data is transferred:
• Device parameters of the 3RW5 HMI High Feature
• Communication parameters
Load communication and HMI parameters to
micro SD card
The parameters of the communication and the 3RW5 HMI High
Feature are transferred from the 3RW52 soft starter to the
micro SD card. The data is saved in an automatically generated
folder. The following data is transferred:
• Device parameters of the 3RW5 HMI High Feature
• Communication parameters
Device change When a device is replaced, the configuration data and
communication parameters can be transferred to the new device.
The following data is transferred:
• I&M 1 data
• I&M 3 data
• Device parameters of the 3RW5 HMI High Feature
• Communication parameters
Save logbooks to micro SD card The logbooks are backed up on the micro SD card. For more
information, see Chapter Logbooks (Page 143).
FW update
• Soft starter
• Communication module
• HMI
• All devices
The firmware update is carried out if a valid firmware file is stored
on the micro SD card. The 3RW5 HMI High Feature automatically
detects which firmware file the micro SD card contains:
The firmware update is documented in the device logbook.
You can find more information on the firmware update in Chapter
Performing firmware update with micro SD card (3RW5 HMI High
Feature) (Page 150).
Memory space
• Complete memory
• Free memory
• Used memory
The memory capacity is displayed.