Mounting and dismantling
3.4 Installing / mounting / removing 3RW5 HMI
SIRIUS 3RW52 Soft Starter
54 Manual, 01/2019, A5E35630451002A/RS-AD/004
Note
Locking switch.
Make sure that the locking switch on the rear of the 3RW5 HMI Standard is in the required
position.
For more information, see Chapter
Standard 3RW5 HMI (Page 105).
● Connect the connecting cable of the 3RW5 HMI Standard to the 3RW52 soft starter.
● Insert the push-in lugs into each side of the enclosure until you hear them engage
① and
fix the 3RW5 HMI Standard on the wall
② + ③.
To Next Page
Loading...
