Parameter assignment
5.7 Parameterizing output 13 / 14 (output signal ON or RUN)
SIRIUS 3RW52 Soft Starter
Manual, 01/2019, A5E35630451002A/RS-AD/004
87
Note
If you do not press any key at all for more than 10 seconds in programming mode, the device
automatically terminates programming mode and reverts to normal operation.
Tip
Alternatively, output 13 / 14 may also be set in the "Parameters > Soft Starter > ON / RUN
relay output" menu of the 3RW5 HMI High Feature (accessories).
To Next Page
Loading...
