4-4
1010PFM-3G
Section 4
Press to Scroll the option list to a class that provides the closest match to your pipe.
To select the Pipe Class press . This moves the highlight to [Choose Pipe Name].
To access the [Pipe Name] option list press
Scroll the option list by pressing to a pipe name and press to select it. This loads
Outer Diameter and Wall Thickness for the selected pipe.
The highlight moves to [Outer Diameter]. Press to enable numeric entry. Type the actual
pipe OD using the appropriate English or metric units. Press to store the OD.
The highlight moves to [Wall Thickness].
Press to enable numeric entry. Type in actual wall thickness using the appropriate English
or metric units. To store the wall thickness, press . Select a Liner Material and enter its
thickness (if required).
Press to leave the [Create/Edit Pipe] menu. This triggers the Save Pipe pop-up Window.
Note that the second line lists the name of the selected pipe. Press and then press
to use this name.
To use a new name, press and then use the appropriate arrow keys to rename the pipe
(8 characters Max.). Press . This adds the new pipe to the pipe class.
4.2.3 DELETE PIPE
This menu allows you to remove any of the pre-loaded pipes within a class from pipe table. We recom-
mend that you use this function only to delete pipes you’ve added; to preserve the factory presets.
To delete a pipe from the Pipe Table
To access the [Delete Pipe] menu press
To access the [Pipe Class] option list press
Scroll option list to the class that contains the pipe to be deleted by pressing
To select the [Pipe Class] press . This moves the highlight to [Choose Pipe Name].
To access the [Pipe Name] option list press
Scroll the option list to the pipe to be deleted by pressing
To remove it from the pipe table press
4.3 TRANSDUCER TYPE MENU
During the Transducer Install procedure, the meter analyzes entered pipe and liquid data, then auto-
matically generates a list of the transducer sizes most suited for the application.
ENT
ENT
ENT
ENT
ENT
ENT
ENT
ENT
To Next Page
Loading...
