Siemens SITRANS P - Disabling Button Lock; Change User PIN [24]

4. Select ON with the or button.
5. Use the button to confirm.
Result
● The display automatically returns to the measurement view.
● The display automatically changes between the measured values every 12 seconds.
● The symbol for button lock "LL" and the measured value ID are displayed alternately.
Note
For a device without display, you activate the button lock using remote operation.
9.2.21.2 Disabling button lock
Procedure
To disable the button lock, press and hold the
button for 5 seconds.
Result
●
The symbol for Button lock "LL" is hidden.
●
You can operate the device using the buttons.
Note
For a device without display, you deactivate the button lock using remote operation.
9.2.22 Change user PIN [24]
Used to change the User PIN.
Setting range: 1 to 65535
Factory setting: 2457
Parameter assignment
9.2 Parameter assignment over device with display
SITRANS P320/P420 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E44852162-AC 135