4. To acknowledge the safety-related error, click on "Acknowledge".
The device restarts automatically.
5. Validate the identification data of your device again: Long tag, product name and serial
number.
Result
● The safety-related error is acknowledged.
●
The device returns to the "Functional Safety disabled" device mode.
Note
The system shows unexpected data or behaves differently than described in this procedure.
● Repeat the entire procedure.
10.4 Disabling Functional Safety over device with display
Requirement
The device is in the "Functional Safety enabled" device mode.
Functional Safety
10.4 Disabling Functional Safety over device with display
SITRANS P320/P420 with 4 to 20 mA/HART
176 Operating Instructions, 11/2019, A5E44852162-AC
To Next Page
Loading...
