Installing/mounting
5
5.1 Basic safety instructions
DANGER
Pressure applications
Danger to personnel, system and environment will result from improper disassembly.
●
Never attempt to loosen, remove, or disassemble process connection while vessel
contents are under pressure.
WARNING
Wetted parts unsuitable for the process media
Risk of injury or damage to device.
Hot, toxic and corrosive media could be released if the wetted parts are unsuitable for the
process medium.
● Ensure that
the material of the device parts wetted by the process medium is suitable for
the medium. Refer to the information in Technical data (Page 199).
WARNING
Unsuitable connecting parts
Risk of injury or poisoning.
In case
of improper mounting, hot, toxic, and corrosive process media could be released at the
connections.
● Ensure that connecting parts (such as flange gaskets and bolts) are suitable for connection
and process media.
WARNING
Exceeded maximum permissible operating pressure
Risk of injury or poisoning.
The maximum permissible operating pressure depends on the device version, pressure limit
and temperature rating. The device can be damaged if the operating pressure is exceeded.
Hot, toxic and corrosive process media could be released.
Ensure that maximum permissible operating pressure of the device is not exceeded. Refer to
the information on the nameplate and/or in Technical data (Page 199).
SITRANS P320/P420 with 4 to 20 mA/HART
Operating Instructions, 11/2019, A5E44852162-AC 43
To Next Page
Loading...
