5. To confirm the validation, enter the validation key.
6. To validate the safety function, start the function test.
The device changes to the "Safety validation" device mode.
7. Confirm with "OK".
Validate safety function
1. Check the correct execution of the safety function in which the device is used.
2.
Select the "Functional Safety" wizard.
Functional Safety
10.2 Enabling Functional Safety
SITRANS P320/P420 with 4 to 20 mA/HART
172 Operating Instructions, 11/2019, A5E44852162-AC
To Next Page
Loading...
