Siemens SOMATOM Emotion syngo CT 2007E User Manual

0.0
syngo CT 2007E Emotion Operator Manual
02/2008 0.0
Software Related Safety Information Safety
A.4-54
Exporting data A.4
To export data, you copy selected patient and examination data
to an external data medium or to the central archive.
A.4
A.4
A.4
CAUTION A.4
When you simultaneously export data to a device (like CDR or
DVD-R drive) and try to read data from the same device with
external (non syngo based) applications, one job or both jobs
can fail (depending on the timing).
A.4
A loss of data is possible. When data is being written to a drive,
any external access at the same time will destroy the current
write job and could even damage the storage disk. Data already
stored on a multi session disk might also become unreadable.
A. 4
✧ Do not run third party applications while you have active
export or import jobs running.
✧ Do not try to access the device with non syngo based appli-
cations while it is writing data or reading data.
✧ To ensure successful writing or reading, check the Local Job
Control to see if there are any write or import jobs in
progress.

Siemens SOMATOM Emotion syngo CT 2007E Specifications

General

Type	CT Scanner
Model	SOMATOM Emotion syngo CT 2007E
Manufacturer	Siemens
Year of Release	2007
Detector Type	Solid-state detector
Number of Slices	16
Slice Count	16
Scan Time per Rotation	0.6 - 1.5 s
Gantry Aperture	70 cm
Table Weight Limit	200 kg
Display	High-resolution monitor
Software	syngo CT 2007E
Slice Thickness	0.6 - 10 mm
Rotation Time	0.6 s
Contrast Resolution	0.3%