Safety Information about Personal Safety
0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
A.2-25
0.0
Radiation protection equipment
A.2
Special equipment is part of the radiation protection regula-
tions.
A.2
Control area
A. 2
The console is located outside the radiation control area. The
patient can be observed through a lead glass window. The gan-
try and the patient table can be operated by remote control.
A.2
✧ When scanning, operate the system from the console
whenever possible.
Radiation shielding
A. 2
If scans have to be released from inside the control area or if
accompanying personnel have to remain there, safety measures
have to be taken (lead aprons, protective walls etc.).
A.2
Radiation warning lamps
A. 2
A.2
The radiation warning lamps on the gantry operator panels, on
the control box as well as site radiation warning lamps to be
provided by the customer must light up if scanning has been
triggered.
A.2
If a radiation warning lamp does not light up once a scan has
been released, please contact Siemens Service.
A.2
To Next Page
Loading...
