Siemens SOMATOM Emotion syngo CT 2007E - Scanning Footswitch (Optional

0.0
syngo CT 2007E Emotion Operator Manual
02/2008 0.0
Accessories System Description
B.7-4
Scanning footswitch (optional) B.7
With the optional footswitch, you can trigger scanning as an
alternative to using the start button. It is connected to the gan-
try.
B.7
i .7 B
In some countries, the footswitch is only supplied with the sec-
ond monitor. B.7
B.7
(1) Footswitch
(2) Connector on the gantry (bottom left-hand corner) for foot
switch