0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
Console Related Safety Advice System Description
B.4-4
Cleaning
B.4
B.4
You can clean the screen even if the monitor is switched on.
B.4
i
.4
B
Using an anti-static cleaner will give you the best results when
cleaning the screen surface.
B.4
✧ Always clean the housing with a damp but not wet cloth.
✧ Use a soft cloth to clean the screen. If necessary, dampen it
with a domestic glass cleaner.
✧ Remove water drops immediately; extended contact with
water discolors the surface.
✧ In order to avoiding damage to the surface coating, never
use corrosive agents to clean the screen surface.
B.4
CAUTION
B.4
Cleaning of the monitor housing during operation!
B.4
Hazard of an electric shock.
B.4
✧ Only clean the housing when the monitor is switched off.
To Next Page
Loading...
