0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
B.1-1
0.0
CHAPTER
B.0
B.1
System Overview
This part gives an overview of the components of your com-
puted tomography system and its optional equipment.
B.1
B
.1
B
Please note that components which are described in this man-
ual may not be part of the configuration that you have.
B.1
Area of application
B.1
The SOMATOM system is used to generate tomographic images
of the organs of a patient for diagnostic purposes according to
the computed tomography procedure.
B.1
The tomographic images generated with this system can be
viewed on a monitor, processed, filmed, and exported.
B.1
Optional equipment
B.1
You can expand a SOMATOM standard system individually and
adjust it to your clinical requirements.
B.1
Configuration of the system
B.1
Components of your system are described in subsequent parts
of this section. The control elements and their locations are
described.
B.1
Software
B.1
For a description of the software and its expansions, please
refer to (→ Online Help).
B.1
To Next Page
Loading...
