0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
Scan Unit (Gantry) System Description
B.2-8
Position displays (Emotion
6-slice configuration: optional,
Emotion 16-slice configura-
tion: standard)
B.2
B.2
(1) Gantry tilt
(2) Horizontal table position
(3) Table height
The display value of the gantry tilt indicates the inclination of
the gantry from the vertical position (0°).
B.2
The display value of the horizontal table position indicates the
position of the table top (in mm) with reference to a reference
zero position, generally an anatomical marking. Table top
movement into the gantry opening is displayed as a negative
value and movement out of the gantry opening as a positive
value.
B.2
The display value of the vertical table position indicates the
table height (in mm) relative to the center axis of the gantry.
B.2
Radiation warning lamps
B.2
B.2
The radiation warning lamps on the gantry operator panels, on
the control box as well as site radiation warning lamps to be
provided by the customer must light up if scanning has been
triggered.
B.2
When the radiation display (optional) is on the top of the front
cover, it must light up as well if scanning has been triggered.
B.2
To Next Page
Loading...
