0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
Patient Table System Description
B.3-8
Limit values
B.3
The table top can be lowered to approx. 500 mm above the
floor level (e.g., during patient positioning). The usual working
height corresponds to the isocenter of the system.
B.3
B
.3
B
The limiting values for the vertical and horizontal table setting
and the angle of inclination of the gantry are interdependent.
B.3
Before you can lower the patient table to its minimum height,
you must retract the table top entirely and set the gantry verti-
cal.
B.3
Always ensure that the movement is not obstructed by any
objects.
B.3
Do not place any objects underneath the patient table!
B.3
To Next Page
Loading...
