0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
Accessories System Description
B.7-12
Respiratory gating
B.7
The respiratory gating function is operated via the console of
your CT system. The respiration of the patient is recorded dur-
ing spiral acquisition; data are acquired during the entire respi-
ration cycle. Images are reconstructed by matching data and
respiration trace.
B.7
Respiratory triggering
B.7
Before starting the CT measurement via the console, the respi-
ratory phase has to be defined using the laptop in the examina-
tion room. Sequential scans are triggered by a respiratory signal
reaching a predefined respiratory amplitude of inspiration or
expiration.
B.7
B
.7
B
For instructions using the Respiratory Gating System please
refer to the operator manual of the Respiratory Gating System
manufacturer. More information can be obtained via
internet.(→ Introduction)
B.7
Connectors
B.7
The connectors for the Respiratory Gating system are located at
the gantry.(→ Page B.2-13 Connectors)
B.7
Trolley
B.7
A trolley for storage and transport of equipment is part of the
Respiratory Gating package.
B.7
To Next Page
Loading...
