Siemens SOMATOM Emotion syngo CT 2007E - Page 275

System Handling Operation of the Patient Table
0.0
syngo CT 2007E Emotion Operator Manual
02/2008 0.0
C.2-7 0.0
Moving the table top horizon-
tally
C.2
C.2
C.2
C.2
✧ Push the table in button and hold it pressed until the table
is correctly positioned.
The table top moves towards the gantry. The new table top
position (in mm) is displayed below the radiation warning lamp.
C.2
or C.2
C.2
✧ Push the table out button and hold it pressed until the table
is correctly positioned.
The table top moves out of the gantry. The new table top posi-
tion (in mm) is displayed below the radiation warning lamp.
C.2
C.2
CAUTION C.2
Horizontal table top movement! C.2
Possible injury of the hand (warning label). C.2
✧ Do not place your hand in the gap of the table top support.