System Handling Use of Storage Media
0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
C.3-3
0.0
Drives
C.3
❏ Do not leave a disc in the drive when turning off your sys-
tem. However, if a disc was left in the drive, remove the
media shortly after you turned on the unit by pressing the
release button.
❏ Make sure that the DVD drive is not subject to vibrations
during operation. Vibrations can cause the drive to stop.
❏ Only open the drawer to insert or remove the disc.
❏ Do not place any objects on the open drawer.
❏ Never press down on the open drawer.
To Next Page
Loading...
