0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
General Safety Information Safety
A.1-8
System movements
A. 1
When the gantry or the patient table is moved, the patient or
other people could be injured.
A.1
✧ Make sure that the patient and other people are not in dan-
ger before you execute system movements or scans.
✧ Ensure that no objects can obstruct movement.
Stopping system movements
and radiation
A. 1
All system movements and radiation can be interrupted in case
of an emergency.
A.1
✧ Make sure that you know where the STOP pushbutton is
located.
✧ Always observe the patient directly. Press the nearest STOP
pushbutton in case of danger.
B
.1
A
You will find STOP buttons on the gantry and on the control
box. (→ Page A.2-16 Terminating system movements and radi-
ation)
A.1
To Next Page
Loading...
