Operation Switching the System On and Off
0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
D.1-5
0.0
Login as a different user
D. 1
If you wish to log onto the system as a different user (e.g., for
service reasons), you must interrupt automatic login.
D. 1
✓ The application is running.
✧ Call up System > End in the main menu.
The End Session dialog box is displayed.
D. 1
✧ Click on Restart Application and confirm your choice.
✧ Press the Shift key and keep pressed during application
startup.
The login dialog box is displayed.
D. 1
✧ Enter a user name and, if necessary, a password and con-
firm your entries.
Booting is continued.
D. 1
Passing the license check
D. 1
Each time you start up the system the software checks whether
it is correctly installed.
D. 1
✧ Check if the operating system starts up without displaying
a license error message.
fB
D.1
A license error occurs and an error message is displayed.
D. 1
You cannot use the system due to an incorrect license number.
D. 1
✧ Call Siemens Service.
D. 1
To Next Page
Loading...
