Operation Switching the System On and Off
0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
D.1-21
0.0
Restart
D. 1
When the system is ready to be restarted after shutdown, a
message is displayed.
D. 1
i
D.1
If the temperature in the gantry rises above a maximum value,
e.g., as the result of a defective cooling system, the gantry is
automatically switched off. A message appears stating that the
gantry is no longer ready for operation.
D. 1
When it has cooled down, the gantry automatically switches on
again. A message stating this fact appears.
D. 1
To Next Page
Loading...
