Operation Positioning the Patient
0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
D.3-3
0.0
Artifacts
D. 3
When positioning the patient, please ensure that the object of
interest is as near to the center of the measuring field as possi-
ble. If it is not, image artifacts may appear on subsequent recon-
structions, such as MPR, 3D etc.
D. 3
✧ Reconstruct an overview image if streaky artifacts impair
the image quality.
This makes it easier to find the causes of the streaks and to avoid
them (e.g., residual contrast medium, hair clips etc.).
D. 3
Examination limits
D. 3
The markings on the table top and positioning mat mark the
metal-free area of the patient table.
D. 3
✧ If necessary, reposition the patient.
Patient comfort
D. 3
The patient should be positioned comfortably in an anatomi-
cally correct position in the middle of the table top.
D. 3
✧ Use positioning aids, if necessary.
This makes it easier for the patient to rest calmly during the
examination.
D. 3
To Next Page
Loading...
