Operation Accessories for Patient Positioning
0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
D.4-5
0.0
Attaching positioning aids
D. 4
The head holder and table top extension are all mounted in the
same way at the head end of the table.
D. 4
D. 4
✧ Push the holding bracket into the receptacle at the head
end of the table until it is firmly engaged.
i
D.4
The head holder has Velcro straps on both sides. Here, you
attach the Velcro straps supplied to immobilize the head.
D. 4
Removing positioning aids
D. 4
D. 4
✧ Press the release button from below and pull the position-
ing aid out of the receptacle.
To Next Page
Loading...
