Safety General Safety Information
0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
A.1-17
0.0
Monitor failure
A. 1
If no image is displayed on the monitor when the system is
switched on, the monitor is likely to be defective.
A.1
✧ Call Siemens Customer Service.
A.1
A.1
CAUTION
A.1
Monitor failure!
A.1
Uncontrolled system.
A. 1
✧ Do not make any more entries via the keyboard.
✧ Interrupt the examination.
✧ If necessary, press a STOP pushbutton or, in case of an
emergency, an EMERGENCY OFF button.
To Next Page
Loading...
