0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
Constancy Test Quality Assurance
F.3-14
Performing the slice thick-
ness test
F.3
The slice thickness is determined with the slice thickness phan-
tom. For each slice thickness, a tomogram of the phantom is
recorded and the real slice thickness is calculated from this.
F.3
F.3
✧ Press the Start key on the control box.
Scanning is started.
F.3
i
.3
F
After the previous test has been completed, the Slice test is
started automatically.
F.3
An image of the slice thickness phantom is displayed in the
image area and the slice thickness is calculated. The procedure
is repeated automatically for all slice thicknesses.
F.3
F.3
To Next Page
Loading...
