Safety Mechanical Safety
0.0
syngo CT 2007E Emotion Operator Manual
02/2008
0.0
A.3-7
0.0
Overheating
A. 3
The possible causes of overheating are:
A.3
❏ Ambient temperature too high
❏ Ventilation openings covered
❏ Defective cooling system
❏ Dirty air filters
i
.3
A
For exchange of the air filters please refer to (→ System Owner
Manual)
A.3
If certain parts of the equipment overheat, a warning is dis-
played on the monitor.
A.3
✧ In this case, finish the current measurement as quickly as
possible.
To Next Page
Loading...
