Simrad FS 70 User Manual

FS 70 System Operation
974-24007001/5.0 39
Select the COM port that you want to configure in the tree under My Computer.
Set the Communications Settings (Baud Rate, Data Bits, Parity, and Stop Bits). Use the
highest baud rate to get the maximum exporting speed.
Click the Use NMEA Settings button to quickly set all of the communication settings to
those normally used by NMEA devices.
3.2.6.4 Saving the sonar image
To save the sonar image to BMP file:
 Click on the recording toolbar to save the sonar image with overlays.
 A “.TXT” file is created along with the “.BMP” file.
3.2.7 User Interface
The DATSS user interface contains the following modules:
- Control Panel
- Toolbar
- Vertical Image Display
- Sounder Image Display
- Message Log Window
- Status Bar

Simrad FS 70 Specifications

General

Brand	Simrad
Model	FS 70
Category	Sonar
Language	English