Simrad GC80 User Manual

Simrad GC80/85 Double System Controller
52
988-12721-001
PIN NO NAME DETAILS
16 27_GND Power for repeaters GND
17 27_24 V Power for repeaters 24 V DC
18 28TX+ Serial signal output (RS422+): selected sensor
19 28TX- Serial signal output (RS422-): selected sensor
20 28TSC Serial signal output (GND)
21 28_GND Power for repeaters GND
22 28_24 V Power for repeaters 24 V DC
23 24R Power for repeaters +24V DC (spare)
24 24RC Power for repeaters GND (spare)
TB24
PIN NO NAME DETAILS
1 STA1 Step-to-step signal output (3 phased): selected sensor
2 STA2 Step-to-step signal output (3 phased): selected sensor
3 STA3 Step-to-step signal (3 phased): selected sensor
4 STA4 Power for repeaters GND
5 STA5 Power for repeaters 24 V DC
6 STB1 Step-to-step signal output (3 phased): selected sensor
7 STB2 Step-to-step signal output (3 phased): selected sensor
8 STB3 Step-to-step signal (3 phased): selected sensor
9 STB4 Power for repeaters GND
10 STB5 Power for repeaters 24 V DC
11 STC1 Step-to-step signal output (3 phased): selected sensor
12 STC2 Step-to-step signal output (3 phased): selected sensor
13 STC3 Step-to-step signal (3 phased): selected sensor
14 STC4 Power for repeaters GND
15 STC5 Power for repeaters 24 V DC
16 Not used -

Simrad GC80 Specifications

General

Type	Gyro Compass
Power Supply	24 V DC
Operating Temperature	-15°C to +55°C
Heading Resolution	0.01°
Heading Repeatability	±0.1°
IP Rating	IP66
Storage Temperature	+70°C
Interfaces	NMEA 0183
Humidity	95% non-condensing