Simrad GC80 User Manual

Simrad GC80/85 Double System Controller
988-12721-001
55
TB29
PIN NO NAME DETAILS
1 GN1RX+ NO.1 GNSS serial signal input
2 GN1RX- NO.1 GNSS serial signal input
3 GN1SC NO.1 GNSS serial signal GND
4 GN2RX+ NO.2 GNSS serial signal input
5 GN2RX- NO.2 GNSS serial signal input
6 GN2SC NO.2 GNSS serial signal GND
7 LG1RX+ NO.1 SDME serial signal input
8 LG1RX- NO.1 SDME serial signal input
9 LG1SC NO.1 SDME serial signal GND
10 LG2RX+ NO.2 SDME serial signal input
11 LG2RX- NO.2 SDME serial signal input
12 LG2SC NO.2 SDME serial signal GND
13 LG1P1 NO.1 SDME vessel speed pulse input (200 P/NM)
14 LG1P2 NO.1 SDME vessel speed pulse input (200 P/NM)
15 LG2P1 NO.2 SDME vessel speed pulse input (200 P/NM)
16 LG2P2 NO.2 SDME vessel speed pulse input (200 P/NM)
Note! GPS and LOG can be connected to the Double System or the Expanded Control
units. It is recommended to connect to the two Expanded Control units.
TB30
PIN NO NAME DETAILS
1 SPTX+ Serial signal output (RS-422+): Spare
2 SPTX- Serial signal output (RS-422-): Spare
3 SPTSC Serial signal output (common)
4 SPCN1 Spare signal output (Potential free contact)
5 SPCN2 Spare signal output (Potential free contact)
6 SPIN1 Spare signal input (Potential free contact)
7 SPIN2 Spare signal input (Potential free contact)
8

Simrad GC80 Specifications

General

Type	Gyro Compass
Power Supply	24 V DC
Operating Temperature	-15°C to +55°C
Heading Resolution	0.01°
Heading Repeatability	±0.1°
IP Rating	IP66
Storage Temperature	+70°C
Interfaces	NMEA 0183
Humidity	95% non-condensing