Simrad GC80 - 5.4 Grounding the units; 5.5 Dip-switch and jumper settings

Simrad GC80/85 Double System Controller
56
988-12721-001
11 DIP SWITCH SETTINGS
This section includes drawings of the different printed circuits boards in
the control unit that include jumpers and DIP switches.
11.1 Double System Controller unit
3 different boards in the Double System Controller unit have jumpers
and/or DIP switches that may be used to configure the GC80/85 Double
system.
The following pages include drawings that show the location of jumpers
and/or DIP switches, together with a short description of the different
settings.