2-1 Using the keys
Labels like , refer to the hardware keys on the
unit.
Labels like
Units, refer to software menu items.
To navigate your way through a menu list, use the cursor
keys (
) to scroll up or down, or access submenus by
stepping left or right. In this manual, stepping though a
menu takes this form:
To access Submenu 2
> > SubMenu1 > Submenu 2.
This means: Press the
key twice, use the cursor
key to step up or down to Submenu1, then step right
to SubMenu2.
Some hardware keys have secondary functions if you
hold a key down for a few moments.
Hold means to hold the key down. For example:
To power down the unit:
Hold
The internal beeper beeps when a key is pressed.
Changing data
to highlight to the data to change, then:
To change a tick box
•
means On or Yes
•
means Off or No.
•
to change the tick box.
To select an option
•
to display the list of options.
•
up or down.
To change a name or number:
•
to display the name or number:
•
to change each character, to step across to the
next one.
Repeat this to change other letters or numbers. •
•
to accept the new value. Or to ignore the
changes.
To Next Page
Loading...
Need help?
General
